Volume 44 Issue 4
Aug.  2022
Turn off MathJax
Article Contents
Feng B,Zhu L Y,Hui H,Wang W Q,Chai X C,Ji D J. 2022. Joint iterative inversion of tectonic stress field and fault identification in Yingjiang area. Acta Seismologica Sinica,44(4):619−631 doi: 10.11939/jass.20210027
Citation: Feng B,Zhu L Y,Hui H,Wang W Q,Chai X C,Ji D J. 2022. Joint iterative inversion of tectonic stress field and fault identification in Yingjiang area. Acta Seismologica Sinica44(4):619−631 doi: 10.11939/jass.20210027

Joint iterative inversion of tectonic stress field and fault identification in Yingjiang area

doi: 10.11939/jass.20210027
  • Received Date: 2021-02-23
  • Rev Recd Date: 2021-08-17
  • Available Online: 2022-06-27
  • Publish Date: 2022-08-16
  • There has always been a problem in inversion of tectonic stress field by focal mechanism solution, it is impossible to determine which nodel plane is the correct seismogenic fault plane. The joint iterative stress inversion method can effectively avoid the error caused by incorrect fault selection by identifying the fault instability. In this paper, the focal mechanism solutions of five groups of earthquake sequences in Yingjiang and its adjacent areas are collected, and the tectonic stress field in this area is inversed. The results show that, in Yingjiang area, the main compressive stress is NNE, and the main tensile stress is ESE, which is basically consistent with the previous research results. However, the local stress field is not completely consistent. The strike of the principal stress axis along the Sudian fault extends from north to south, and the angle gradually shifts to the north. In the southwest of Yingjiang, the strike of the principal stress tends to the East, which may be related to the transverse extension of the Dayingjiang fault. In addition, the strike, dip angle, slip angle and friction coefficient of the main seismogenic fault nodal planes of the focal mechanism solutions of five groups of earthquake sequences are identified by stress field inversion. This provides a valuable reference for the future seismic and crustal dynamic changes research in this region.


  • loading
  • [1]
    Deng F,Liu J. 2014. Source parameters and correlation coefficients of focal mechanisms for the 2008 Yingjiang earthquake sequence[J]. Earthquake,34(2):22–34 (in Chinese).
    Fang L H,Wu J P,Zhang T Z,Huang J,Wang C Z,Yang T. 2011. Relocation of mainshock and aftershocks of the 2011 Yingjiang MS5.8 earthquake in Yunnan[J]. Acta Seismologica Sinica,33(2):262–267 (in Chinese).
    Guo X Y,Chen X Z,Wang S W,Wang H X. 2014. Focal mechanism of small and moderate earthquakes and tectonic stress field in Sichuan-Yunnan areas[J]. China Earthquake Engineering Journal,36(3):599–607 (in Chinese).
    Hu X H. 2020. The Study of Tectonic Stress Field in Yunnan and Its Adjacent Areas[D]. Sanhe: Institute of Disaster Prevention: 45–46 (in Chinese).
    Huang X L,Wu Z H,Zhao X Y,Wu K G,Huang X J,Du J J. 2015. Seismogenic structure of 2014 MS5.6 and MS6.1 earthquakes in Yingjiang,Yunnan Province[J]. Acta Geoscientica Sinica,36(6):760–769 (in Chinese).
    Ji J Q,Zhong D L,Zhang L S. 2000. Kinematics and dating of cenozoic strike-slip faults in the Tengchong area,West Yunnan:Implications for the block movement in the southeastern Tibet Plateau[J]. Scientia Geologica Sinica,35(3):336–349 (in Chinese).
    Luo Y, Bao F, Ni S D, Chen Y, Chen Q F, Fu H. 2011. Study on the 2008 MS5.9 earthquake sequence in Yingjiang, Yunnan Province[C]//Proceedings of the 27th Annual Meeting of Chinese Geophysical Society. Changsha: China University of Science and Technology Press: 422 (in Chinese).
    Sun Y,Wu Z H,An M J,Long C X. 2014. Activity characteristics of primary active faults in Yunnan-Sichuan area and their seismic activity in the past[J]. China Earthquake Engineering Journal,36(2):320–330 (in Chinese).
    Wan Y G. 2012. The grid search algorithm of tectonic stress tensor based on focal mechanism data[J]. Recent Developments in World Seismology,(6):19 (in Chinese).
    Xie F R,Su G,Cui X F,Shu S B,Zhao J T. 2001. Modern tectonic stress field in southwestern Yunnan,China[J]. Acta Seismologica Sinica,14(1):17–23 (in Chinese).
    Xu Y. 2013. Decollection of Focal Mechanism of Moderate and Small Earthquakes With ML3.0 or Higher in Yunnan Area (2008−2012)[M]. Yunnan: Yunnan Science and Technology Press: 168–186 (in Chinese).
    Zhang L N,Han L B,Luo Y. 2016. Source parameters of May 24,2014 MS5.6 and May 30,2014 MS6.1 earthquakes in Yingjiang,Yunnan Province[J]. Earthquake,36(1):59–68 (in Chinese).
    Zhang Y F,Chang Z F,Peng Y Z,Zhang Y H. 2018. Discuss on macro-anomalies of the Yunnan Yingjiang M6.1 earthquake and its relation of tectonics[J]. Journal of Seismological Research,41(1):148–156 (in Chinese).
    Zhao X Y,Han L B,Long F. 2012. Focal mechanism solutions and seismogenic structures of Yingjiang MS≥4.0 earthquake sequences in 2011[J]. Journal of Seismological Research,35(4):477–484 (in Chinese).
    Gephart J W,Forsyth D W. 1984. An improved method for determining the regional stress tensor using earthquake focal mechanism data:Application to the San Fernando earthquake sequence[J]. J Geophys Res,89(B11):9305–9320. doi: 10.1029/JB089iB11p09305
    Hardebeck J L,Michael A J. 2006. Damped regional-scale stress inversions:Methodology and examples for southern California and the Coalinga aftershock sequence[J]. J Geophys Res,111(B11):B11310.
    Harris R A. 1998. Introduction to special section:Stress triggers,stress shadows,and implications for seismic hazard[J]. J Geophys Res,103(B10):24347–24358. doi: 10.1029/98JB01576
    Jacques A. 2002. Inversion of earthquake focal mechanisms to obtain the seismotectonic stress IV:A new method free of choice among nodal planes[J]. Geophys J Int,150(3):588–609. doi: 10.1046/j.1365-246X.2002.01713.x
    Lund B,Slunga R. 1999. Stress tensor inversion using detailed microearthquake information and stability constraints:Application to Őlfus in southwest Iceland[J]. J Geophys Res,104(B7):14947–14964. doi: 10.1029/1999JB900111
    Martínez-Garzón P,Kwiatek G,Ickrath M,Bohnhoff M. 2014. MSATSI:A MATLAB package for stress inversion combining solid classic methodology,a new simplified user-handling,and a visualization tool[J]. Seismol Res Lett,85(4):896–904. doi: 10.1785/0220130189
    Michael A J. 1984. Determination of stress from slip data:Faults and folds[J]. J Geophys Res,89(B13):11517–11526. doi: 10.1029/JB089iB13p11517
    Michael A J. 1987. Use of focal mechanisms to determine stress:A control study[J]. J Geophys Res,92(B1):357–368. doi: 10.1029/JB092iB01p00357
    Vavryčuk V,Bouchaala F,Fischer T. 2013. High-resolution fault image from accurate locations and focal mechanisms of the 2008 swarm earthquakes in West Bohemia,Czech Republic[J]. Tectonophysics,590:189–195. doi: 10.1016/j.tecto.2013.01.025
    Vavryčuk V. 2014. Iterative joint inversion for stress and fault orientations from focal mechanisms[J]. Geophys J Int,199(1):69–77. doi: 10.1093/gji/ggu224
  • 加载中


    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(6)  / Tables(2)

    Article Metrics

    Article views (174) PDF downloads(38) Cited by()
    Proportional views


    DownLoad:  Full-Size Img  PowerPoint