SV波入射下近断层破碎带山岭隧道地震响应

Seismic response of the mountain tunnel near a fault fracture zone under SV wave incidence

  • 摘要: 为揭示近断层破碎带山岭隧道地震响应规律,采用高精度多域间接边界元法(IBEM),建立山体-断层破碎带-隧道衬砌耦合数值模型,并进行SV波入射下的地震响应模拟。通过对比分析模型退化结果,验证了该方法的有效性和准确性,进而重点分析断层破碎带剪切波速、断层距、入射波频率及入射角度对隧道动应力集中因子(DSCF)幅值和场地位移响应的影响。结果表明:近断层破碎带山岭隧道相比无断层破碎带山岭隧道具有更高的DSCF峰值,且随着入射波频率增大,下盘隧道的DSCF峰值逐渐增大,无量纲频率η=10时最大增幅可达60.9%,而断层破碎带对上盘隧道的屏蔽效应逐渐占主导;随着剪切波速的降低,DSCF峰值增大,表明低波速破碎带加剧了局部动应力集中;隧道拱肩和拱脚的DSCF频谱呈多峰特征,其随断层距的变化反映了波传播路径对局部动应力集中的影响;山体-断层破碎带-隧道的整体位移响应随着SV波入射角度的增大而减小,高频波入射下,干涉效应更加复杂,尤其在断层破碎带附近波动显著增强。

     

    Abstract:
    In recent years, with the continuous expansion of transportation infrastructure in China, large-scale highway and railway projects have been rapidly advanced in western regions. However, these areas are characterized by pronounced topographic relief, complex geological conditions, and the dense distribution of major fault zones, making it inevitable for tunnel projects to traverse mountainous terrain or be constructed in the vicinity of active faults. Post-earthquake damage investigations have demonstrated that near-fault mountain tunnels are particularly vulnerable to severe damage during strong earthquakes. For example, during the 1995 Kobe earthquake in Japan, 12 out of 100 investigated mountain tunnels suffered severe damage. Following the 1999 Chi-Chi earthquake in Taiwan, China, surveys of 57 mountain tunnels revealed varying degrees of damage in 49 tunnels, among which approximately 26% of the 50 tunnels located within 25 km of the fault experienced severe damage. Similarly, in the 2008 Wenchuan earthquake in China, 13 out of 18 tunnels along the Dujiangyan-Wenchuan Expressway were severely damaged.
    It is noteworthy that rock masses in the vicinity of fault zones are generally loose, highly fractured, and markedly heterogeneous. These characteristics induce complex wave scattering and energy redistribution during seismic wave propagation through mountainous terrain and fault fractured zones, leading to more complicated seismic responses and increased uncertainty for tunnels crossing near-fault damaged zones. Therefore, a systematic investigation of the dynamic response of mountain tunnels in near-fault fractured zones is of significant importance.
    Studies on the seismic response of mountain tunnels have mainly been conducted using shaking table tests and numerical simulation methods by researchers worldwide. Owing to the high cost and inherent limitations of shaking table experiments, numerical simulation has become an essential research tool because of its flexibility and its capability to perform parametric analyses under complex topographic and geological conditions. Although previous studies have separately examined mountain tunnels considering topographic effects and near-fault tunnels influenced by fault fractured zones, the seismic response mechanism of the coupled mountain, fault fractured zone, and tunnel system has not yet been sufficiently clarified.
    In contrast to domain-based discretization approaches, the boundary element method requires discretization only along the domain boundaries, which reduces the problem dimensionality and leads to improved computational efficiency with lower memory consumption. Because the scattered wave field is formulated using Green’s functions that satisfy the governing equations, radiation conditions at infinity are inherently satisfied, and numerical dispersion can be effectively mitigated in the high-frequency range. Consequently, high solution accuracy can be maintained without introducing complex artificial boundary treatments. In this study, a high-precision multi-domain indirect boundary element method (IBEM) is extended to model the coupled mountain, fault fractured zone, and tunnel system, and seismic response analyses are conducted under incident SV wave excitation. The effectiveness and accuracy of the proposed method are verified through comparative analyses of results obtained from degenerated models. A systematic parametric investigation is then performed to examine the influences of the shear-wave velocity of the fault fractured zone, the distance between the tunnel and the fault, the incident wave frequency, and the incident angle on the dynamic responses of the tunnel and the surrounding ground. Furthermore, the differences in seismic responses between tunnels located on the hanging wall and the footwall are analyzed.
    The results show that mountain tunnels located within near-fault fractured zones exhibit higher peak dynamic stress concentration factors than those without fractured zones. With increasing incident wave frequency, the peak dynamic stress concentration factor of footwall tunnels increases gradually, and a maximum amplification of 60.9% is observed at η=10, while the shielding effect of the fault fractured zone on tunnels located on the hanging wall becomes increasingly significant. A decrease in shear-wave velocity leads to higher peak dynamic stress concentration factors, indicating that low-velocity fault fractured zones enhance seismic amplification. In addition, the overall displacement response of the coupled system decreases with increasing incident angle of SV waves. Under high-frequency excitation, wave interference becomes more complex, particularly in the vicinity of the fault fractured zone, where seismic motion is significantly intensified. This study aims to elucidate the seismic response characteristics of mountain tunnels in near-fault fractured zones, providing a scientific basis for the seismic design and safety assessment of similar engineering projects.

     

/

返回文章
返回